Loctite - Bonding & Threadlocking
Henkel corporation’s familiar LOCTITE brand represents the most complete line of high performance adhesives , sealants and dispensing/ curing systems available anywhere from a single supplier. Used to hold complex machines together, LOCTITE products are used to build everything from automobiles to dishwater to tractors and to the trucks that deliver them. LOCTITE products make these machines and inner assemblies less expensive , more reliable and long lasting.
OVERALL BENEFITS OF ADHESIVES:
- Join dissimilar substrates e.g plastics metals, etc.
- Distributes stresses evenly.
- Fill large gaps.
- Seal, bond and protect parts.
- Improve cosmetic appearance
- Easily automate manufacturing process
- Promote a competitive advantage
- Reduce overall production costs.
Products
LOCTITE SI 5910
Gasket sealant for metal or plastic surfaces.Excellent oil resistance.Excellent adhesion
Loctite HY 4090
High moisture resistance Impact resistance Gap filling properties up to 5mm Temperature resistance up to +150 degree celsius
Loctite 2701
High strength thread locker up to M36 Permanent Locking. Corrosion protection.
Loctite 290
High strength thread locker Wicks between engaged threads and eliminates the need for disassembly prior to application.
Loctite 243
Medium strength thread locker up to M20 Prevents loosening from vibration. Corrosion protection
LOCTITE 518 GASKET MAKER
SHigh performance on passive metals without an activator emi-flexible, medium-strength anaerobic flange gasket
For active and inactive rigid metal flanges Cures through minor surface contamination Adapts to flange surface irregularities and gaps up to 0.25 mm
Loctite SF 7900 Ceramic Shield
ceramic dry-film protective coating for MIG/MAG welding processes. Easy to apply Excellent adhesion of coating
Spray coating dries within seconds Protects contact tips, welding nozzles and jigs from welding spatter
Eliminates costs for mechanical cleaning equipment Improve quality of welding seams Increase productivity by up to 10%
LOCTITE 3090
The new multi-material adhesive LOCTITE 3090 unites the best of both worlds: faster than an epoxy and more gap filling than a superglue it brings advanced technology to your workshop Gap filling: Up to 5 mm Fast-curing: Fixture time: 90 – 150 sec. Multi-Substrate: Well suited for rubbers and for porous and/or acidic surfaces Suited for plastics.
Loctite 406
Instant Adhesive - Low viscosity, plastics & rubber Resists temperatures up to 120 °C! Rapid bonding of plastics, rubbers, including EPDM, and elastomers Loctite 770 or Loctite 7239 Polyolefin Primer improves bonding on difficult to bond substrates
Loctite 401
Instant Adhesive - Universal, low viscosity Resists temperatures up to 120 °C! General purpose For acidic surfaces such as chromate or galvanized surfaces For porous substrates such as wood, paper, leather, cork and fabric
P1 NSF Reg. No.: 123011
Loctite SI 5990 silicone sealant, copper, big gaps, label free
Excellent temperature resistance For all kind of flanges including metals and plastics as well as combinations of both Can replace pre-cut paper or cork gaskets Non corrosive Health & Safety friendly Ready-to-use Can
Loctite 648 high strength
Increased temperature resistance Ideal for retaining of parts with a clearance or interference fit, i.e.retaining bushes, bearings, seals, fans, and liners
Loctite 638 high strength
Best resistance to dynamic, axial and radial loads Ideal for shafts, gears, pulleys and similar cylindrical parts
P1 NSF Reg. No.: 123010 DVGW Approval (EN 751-1): NG-5146AR0619 WRC Approval (BS 6920): 0511518
LOCTITE SI 5699
Ideal for sealing all types of flanges including stamped sheet metal where water glycol resistance is required Tack free after 10 min.
Loctite 222 low strength thread locker
Ideal for low-strength thread locking of adjusting screws, countersunk head screws and set screws Good on low strength metals which could break during disassembly, e.g. aluminium or brass
Loctite 2700 - high strength thread locker
Leading in health and safety No hazard symbols, no risk phrases & no safety phrases Excellent chemical and thermal resistance of cured product For applications where disassembly is not required
LOCTITE SF 7039 CONTACT CLEANER
Does not effect insulting varnishes Displaces moisture
LOCTITE SF 7200 GASKET REMOVER
Removes backed on gasket & sealent residues, dried oil, tar, carbon deposit & paint Easy removal prevents damage
LOCTITE SF 7063 SURFACE CLEANER
A non-CFC solvent based formulation for cleaning & degreasing of surface to be bonded with LOCTITE adhesives.
LOCTITE LB 8021 SILICON TUBE SPRAY
Resists temperatures up to +200° Food approved (FDA listed ingredients for USDA category H1 & CNERNA GUIDE (1992)
Ideal for plastics & elastomeric parts
LOCTITE LB 8101 CHAIN LUBRICANT
Anti-filing properties Water resistance Resists temperature up to +170°
LOCTITE LB 8007 Copper Anti-Seize
Can be used on copper, brass, cast iron, steel, all alloys including stainless steel, all plastics & all non – metallic gasket materials.
LOCTITE LB 8005 BELT DRESSING SPRAY
Restores moisture to prevent cracking & premature wear. Extends the overall life of the belt Can be used on V-& flats belts
LOCTITE LB 8109 Grease spray
Immediately forms a tough, durable, water repelling film.Lubrication of chains, cog wheels, levers, rollers, steel springs & haulers.
LOCTITE LB 8201 MULTI SPRAY
Stops moving parts from squeaking Protects from corrosion Cleans & preserves metal Frees seized or corroded parts
Displaces moisture
LOCTITE SF 7850 HAND CLEANER
Free from mineral oils.Contains premium skin conditioners Work with or without water Removes ground-in dirt, grease, grime & oil 3L & 400ML
LOCTITE 3090
Perfect for all quick repair of broken plastic parts & all type of emergency repair Fast curing Excellent bonding for all common substrates
